Solar Power in Massachusetts

Archive for March, 2010

Chek Technology Inc.

Noise and Vibration Control

Noise and vibration control is an issue that is much more common than one might originally think. In fact, it can creep up in the most unlikely of places. A good case in point is animal lab environments. Indeed, ALN Magazine recently ran an article titled “Noise & Vibration Considerations for the Animal Lab Environment.” Therein, the publication pointed out, “In the lab animal facility setting, noise, sound, and vibration affect the life cycle, interaction, and behavior of animals.” However, because “the impact of noise, sound, and vibration is a largely undocumented factor in the research,” it’s an often overlooked issue.

“If the sound pressure levels get too high,” the article continues, “there is a negative impact on animals and structures.” Vibration control, however, is just as important to these animals as noise control in that it “is a driving force behind radiated sound.”

Obviously, exposure to noise and vibration can be detrimental to an animal’s hearing, but the risks don’t stop there. “Sound and vibration can [also] have a physical impact on animals.” Even more startling, “Smaller animals are more susceptible to the affects of sound and vibration over time and will adapt or adjust accordingly. In some cases, mutations may result from exposure to undesirable conditions.”

How can animal laboratories mitigate these problems? The magazine notes, “The designers can control items that are constant disturbances that may greatly impact the animal community. Items within the designer’s control include ventilation system design, machinery vibration isolation, wall construction, lighting selection, and computer terminal placement.”

During the design process, animal labs may want to consult with a producer of custom-molded rubber and rubber-to-metal bonded parts for noise and vibration control. A world leader in the creation of rubber molding and rubber-to-metal bonded parts can help to create an environment that is not only safe for the animals being kept there but is also conducive to a healthy work environment for the people who are employed there.

The Vibro-Insulator line of isolators and mounts, in particular, aid in the control of noise, vibration, and shock. Selecting the right type of mount for an individual animal lab’s specific applications can prove tricky, however. That’s why consultation with an expert with reputable qualifications in rubber molding and rubber-to-metal bonding can be very beneficial.

Of course, once professional advice has been obtained, browsing the Vibro-Insulator catalog allows animal labs easy navigation so they can select the correct mount for their application. Rubber Vibro-Insulators come in a variety of styles and sizes to handle most vibration isolation problems. Most of the mount styles are designed to be used in either the compression or shear direction.
Selection of the proper Vibro-Insulator for a specific application boils down to a multi-step mathematical function that an expert can calculate for the lab or into which the lab’s design team can plug the following information:

1. The maximum load that must be supported.
2. The number of mounts supporting the load.
3. The frequency of the disturbing vibration.
4. Any restrictions on the size or style of the mount based on space limitations or assembly considerations.

Carmen Fontana is a Web Services Manager for Western Reserve Internet Services. Karman Rubber is a world leader in vibration control.

Gadgets of Solar

The Holy Reduction Grail

The hard truth is that we all need to reduce. Reduce the amount of money we spend. Reduce the amount of food we eat…and our waistlines. And reduce the amount of stuff we throw away. In fact new we look at the 3 R’s of reduce, reuse, recycle, they are actually in that order for a reason. It is a hierarchy for a reason and reduce is the Holy Grail. Put in its simplest terms reduce means that we use less of the earth’s resources and in any environmental scheme should be our first priority.

That said, it is also the hardest to accomplish. When I thought about all the things we do to be greener, the number of examples of reducing stumped me. I suppose the most obvious example of our efforts to reduce was the decision some months ago, not to purchase an automobile. My husband has the use of a company van, but even that is rarely used. The difficulty comes when we want to go anywhere as a family. The work van has only one bucket seat in the front that fits three people. Obviously this presents difficulties. Even on our Saturday shopping trips with my mother-in-law, I end up sitting in the back of van; a solution that is both dangerous and illegal for the children. About a year ago, when I was working full-time, we were seriously considering buying a vehicle. But in the end, we thought the expense was too much when you consider not just payments, but insurance, road tax, maintenance and gas. Instead, we signed up for StreetCar; a car rental scheme that you pay a monthly fee to join and an hourly or daily rate only when you need to use a car or van. Looking back, that was one of the best decisions we have made both for the environment and family finances.

The other obvious example I found of reduction was our decision a year ago to switch to bags for life. We now have a stack of them beneath our kitchen sink and faithfully use them for our Saturday shops. But I do admit to occasionally forgetting them when just running out to grab something quickly. When this happens though, we make certain to re-use (we’ll talk more about that tomorrow) any plastic bags we get for outings or for small bin liners. Did you know that in the UK alone 100,000 TONNES of plastic bags are thrown away each year; that is the equivalent of 70,000 cars? So if there is one thing, I can encourage you to do, it is purchase bags for life. My store sells the sturdy plastic ones for about forty pence, the jute ones are about a pound, and the pretty cloth ones are about three pounds with a portion of the proceeds going to charity. Or it is very simple to make your own if you sew.

Speaking of which, sewing and mending our clothes is another excellent way of reducing. My boys from my husband to my sons are always wearing holes in their jeans on the inside thighs. Before the economic downturn, I admit we were likely to just toss them out and purchase new ones. But since I have not been working, we have instead taken them to the drycleaners and had them patched. The cost of the repairs is less than the cost of purchasing new (although I am committed to mending them myself from now on…a further savings). And we have reduced in a very small way the demand for jeans.

Of course, as I sit at my desk in my bedroom I am witnessing another reduction…the daylight streaming in through the open curtains. One of the first things I do each morning is open the curtains and the blinds. By using natural light when and where possible, we are reducing the amount of electricity that we consume and that the power grids must generate. We are also of course saving money on our bills. My husband is a genius at this; going around and turning off and unplugging everything he can each night before bed. I admit though that being American this whole switch on the plug thing still gets me and I often forget to do that, but I am improving. Of course, another example was turning down our thermostat during the winter and wearing heavier layers of clothes instead. In fact, I can think of only a couple of days this winter when we turned our heat on before night fall at all.

These are just a few ideas of ways that our family is reducing. There are many other things that we and you can do to cut back on the things we consume and help save our earth’s precious resources. On Friday as I said, we will do a mini-inventory and I will commit to new ideas on how our family can better live the 3 R’s reduce, re-use, recycle. I will be especially focusing on reducing since this is the most important of the R’s.

Terri O’Neale is the mother of six; ranging in age from 3 to 22. She has been both a working and stay-at-home mother at various times in her life. She was also a single mother for almost five years, before re-marrying the love of her life at the age of forty. Obviously, she has a life-time of training in raising a family on a tight budget. In addition to these real life experiences, she possesses a bachelors degree in health education and a minored in environmental management in her masters programme.

Terri feels strongly that this is one of the most challenging times in history for the family, but she also believes that families with the will and resolve to address the pressing issues of saving money, becoming greener, leading healthier lifestyles and spending more time with one another can endure these challenging times and come out victorious in the end.

Through Frugal Family articles, blogs, videos and social networking, she helps modern families rediscover some lost art forms such as cooking, sewing, and gardening. The goal is not to go back in time or become fanatical, but to help all families find simple and effective ways that fit into their lifestyle to make moderate changes with huge impacts. For more information, check out her blog http://frugalfam.wordpress.com/.

A Carbon Footprint is Impacted by Fugitive Refrigerant Gas Emissions

The United States and a host of other foreign countries are focusing on fugitive emission tracking for certain industries. The goal is to identify the amount of substances that are emitted into the atmosphere when a refrigerant gas leak occurs. This will give government officials at the EPA a better understanding of the amount of greenhouse gases harming the environment each year and contributing to global warming due to the ineffective management of refrigerant gases.

Fugitive emission takes place when an unexpected leak of a hazardous substance occurs in a system and the discharge is not contained in a vent, stack, or duct. This may be caused by a component failure, poor servicing, or a breakdown in some industrial process. When a system containing refrigerant leaks, these high global warming potential substances cause damage to the atmosphere. Certain refrigerant gases are not broken down in the atmosphere and end up entering the stratosphere and destroying the protective ozone layer over time.

Across the U.S. economy, refrigerant gases or fugitive emissions equal over 300K tons of carbon dioxide each year. Other countries have similar or worse outputs. Many environmental regulations, such as The Montreal and Kyoto Protocols, exist to reduce the escape of harmful substances, like refrigerants, into the atmosphere over time. There are additional goals to reduce the potential for global warming in the near future and to improve air quality in the long term by reducing the emissions refrigerant gases.

A select few refrigerant gases have multiple detrimental effects on the environment. Not only are they ozone depleting substances but they are also chemicals with a high global warming potential (GWP) which places them into the category of greenhouse gases which lead to global climate change. For many reasons, it is important to effectively monitor, track, and report refrigerant gas usage.

The EPA has finalized its rules pertaining to any fugitive emission occurrence, whether through evaporation or a leak. The regulations apply to several industries, including existing and newly constructed facilities with systems using refrigerant gas in their workplace heating and cooling systems. Other industries are industrial chemical manufacturing, electric services, pulp and paper mills, and petroleum refinancing.

Tracking fugitive refrigerant gases is required by facilities owning or operating HVAC-R systems or by manufacturers who produce them. The EPA has identified a number of dangerous compounds, among them chloroflurocarbons, hydrofluorocarbons, methyl bromide, halons, methyl chloroform, and carbon tetrachloride.

A particular concern for fugitive emission problems is with refrigerant gas, because it contains chloroflurocarbons and hydrofluorocarbons, two primary contributors to the weakening of the ozone layer and the increase in greenhouse gas volumes. Furthermore, refrigerant gas is used across many industries in refrigeration and cooling units, ventilation and air conditioning systems, and fire protection systems.

When a fugitive emission occurs, businesses are required to track the refrigerant leak rates and report annul refrigerant usage it to the EPA. One of the primary emissions scopes, fugitive refrigerant gas emissions are an integral part of an organizations carbon management requirements. Of the utmost importance is the determination of the HVAC-R system that is leaking and the capturing of the service event detail related to fixing the leak. Systems containing refrigerant gases must be inspected by EPA certified technicians and all service events must be logged when refrigerants are handled.

The new fugitive emission regulations provide a more standardized approach to thresholds identified by the U.S. Clean Air Act at the direction of the EPA. These include continuous monitoring, tracking of leaks, and reporting of leak repair, and containment.

Web applications and specialized tools can increase an organization’s efficiencies related to HVAC-R system maintenance, improve accuracy of refrigerant inventories thus saving money, and turn manual processes into a centralized, automated work flow. Development firms who specialize in the area. They ensure compliance and reduce the likelihood of substantial fines.

Daniel Stouffer, Product Manager at Verisae, has more information about fugitive emissions management. Refrigerant Tracker makes it easy to monitor, manage, and report refrigerant gas usage across multiple locations. Learn more at: http://www.Refrigerant-Tracker.com

The Headlines of Aviation News

Activated Carbon Odor Combatant

There are many stinky things in the world today. From the bathroom to the kitchen there are things in everyday life that can cause a nose to curl. However, activated carbon can quickly eliminate odors in the home, office, or commercial building. While many products simply mask odors or cover them up, activated carbon can absorb the odor and eliminate it once and for all. There are many ways that activated carbon can be used within a building to remove odor. Whether the smell is a permanent or occasional odor, activated carbon can be used to eliminate it.

Air Filtration Systems

An air filtration system can be placed on the air supply to any building to help eliminate the odors in the building. If there is a central heat and air system in the building the air filtration system can be used in the circulation process. A free standing air purification system can also be used in bathrooms that are used by numerous employees. These systems are much more effective than other means of removing odors.

Odor Blocking Masks

For those who work or play in environments that are not appealing to their noses there are activated charcoal masks that can be worn. These masks work to block the smells from reaching the nose. As the smell passes through the mask it is sucked up against the carbon and held there, eliminating the smell. These masks are perfect for those who work with garbage, waste, or cleaning products.

Flatulence Elimination pads and Inserts

Flatulence is a problem for many people today. Because of a fast paced environment and fast food restraints many people experience this condition. Luckily, there are now flatulence pads that can be used to eliminate the odor that accompanies flatulence. These pads can be placed in a chair for those in an office. However, there are also flatulence pads that can be placed inside the undergarment to eliminate odors.

Odor Eliminators for Pets

Activated charcoal can also be used to eliminate the odor that accompanies pet ownership. There are many smells that can come from litter boxes, accidents on the floor, and messes made in the yard. However, activated carbon can be made in the form of a powder. This powder can be sprinkled into the litter box, on the carpet, or in the yard outside. For use on the carpet in can be sprinkled on and then vacuumed up However, in other places it can be left to continue working. It is perfectly safe to use around pets and will not cause any harm if they ingest it.

There are many uses fro activated carbon today. It is an excellent odor eliminator. While these are many of the uses for eliminating odors there are many more. Anywhere there is a smell or odor; activated carbon can be used to eliminate it. This product is a green option for cleaning, absorbing, and eliminating odor. Activated carbon also has many other uses including purification, detoxification and moisture absorption.

Carbon Resources Management Team has over 70 years of experience in the Activated Carbon and Activated Charcoal carbons industry. Our Sabre series® activated carbon products are the most diverse line of activated carbon products on the market.

Article Source: http://EzineArticles.com/?expert=Kim_Walsh

Advanced Solar Energy Technology

CNPV Solar Power Signs PV Module Sales Agreement with Sinatis Europe

CNPV Solar Power SA has signed a long-term sales agreement with Sinatis Europe, a leading distribution and project development company in France. CNPV Solar Power is a leading integrated solar photovoltaic product manufacturer. …

Solar Plant Uses Photosynthesis to Charge Your Gadgets | Inhabitat

Inhabitat reader Raven tells us about the Solar Plant â?? a flowerpot-shaped charger that uses the sun’s rays to charge all of your portable electronic gadgets. This clever design from Ku Bon-Seop of South Korea features a set of solar …

First Solar joins Desertec; Solar players landing deals – SmartPlanet

First Solar said Tuesday that it has joined the Desertec Industrial Initiative, a solar power project that aims to supply 15 percent of Europe’s.

Ted Turner Goes Solar | www.bullfax.com

The United States could source 10 percent of its electricity from solar power by 2030, a report said Tuesday, winning support from a US lawmaker who wants to boost the number of US solar panels.The report, produced by the independent …

Suntech Selected to Power Taiwan's Largest Solar Power Plant …

Suntech Selected to Power Taiwan’s Largest Solar Power Plant – Recent Initiative Reflects Growing Demand Throughout Asia Pacific – PR Newswire WUXI,

A Change in Krill Ecosystem

Antarctic Peninsula has been experiencing warming trends for over 40 years with an increase of 2-3 C, thus correlating with lower sea ice conditions in the Amundsen Sea and Bellinghausen Sea. Warming temperatures around the Antarctic Peninsula is changing the dynamics of the ecosystem. The rise in atmospheric temperature is causing increasing in melting of freshwater glaciers and ice shelves. Fresh water emerging into the sea counteracts the salinity within a regional area. Changes identified are;

• Decrease in sea water salinity up to 60 miles offshore
• Lower sea ice
• Decreased krill population
• Increased salp (open ocean tunicate that is reminiscent of a jelly-fish) population
• Increase in cryptophytes (single cell phytoplankton algae)
• Decrease in diatom phytoplankton
• Increase in carbon sequestering in deep ocean sinks
• Decrease in carbon availability in the food chain

The Antarctic Krill (Euphausia superba), a small shrimp like crustacean is the most important zooplankton species associated with the sea ice and plays a crucial role in the Antarctic food web. On a regional basis the amount of krill appear to be declining in the southern ocean. There are definitely lower trends in krill population during lower sea ice years around Antarctica. Part of the rational for the population decline is that ice algae rely on the sea ice for protection and growth. The krill need the sea ice in order to feed on the algae and phytoplankton.

Krill occur in groups or large swarms. They are less than 3 inches in size and feed primarily on phytoplankton and sea ice algae. Krill filter diatom phytoplankton out of the water column and scrape algae from the sea ice. Apart from frequenting the sea ice to feed, krill in particular juveniles, seek protection from predators in the many nooks and crannies formed by the deformed sea ice floes. Krill is the staple food of many fish, birds and mammals in the Southern Ocean. The biomass of Antarctic krill is considered to be larger than that of the earth’s human population.

Sea- ice algae utilizes atmospheric carbon dioxide for its energy source, the same as plants do on land. Krill diet of the sea-ice algae and phytoplankton is essential for converting the carbon for use in higher animals such as fish, birds, and whales. This carbon conversion is a very critical role in predatory nutrition. Additionally krill do eliminate some of the silica from the diatom shells and carbon in sticky balls that sinks nearly two miles into the deep ocean. These cold, deep waters are able to contain carbon dioxide and prevent the gas from rising to the surface, thus immobilizing carbon that is not passed into the food chain.

In recent years there have been increases in algae phytoplankton called cryptophytes. Mark Moline, California Polytechnic State University, states that the cryptophyte population correlates with warmer temperatures and lower salinity waters that are produced by the melting of the freshwater glacier. Cryptophytes measure around 2 mm, while other plankton in the Antarctic waters are much larger and measure 15 to 270 mm. Along with the increase in cryptophyte population an increase in salp, a pelagic tunicate, population has also occurred. There are differences between salps and krill. Salps feeding efficiency is capable of grazing on smaller food sources less than 4mm, whereas, the Antarctic Krill efficiency declines on any food less than 20 mm. The salps compete with krill for the phytoplankton and thus decrease the krill population. Additionally the salps feed on krill larvae, which also cause a decline in krill numbers.

The warming trend in the Antarctic Peninsula is showing a pattern of increasing cryptophytes over other phytoplankton and the increase in the salp. This influence is due to the low sea ice and the lowering of the salinity in the seawater. Salps and cryptophytes do better in the lower salinity, while the krill and other plankton are unable to tolerate the increased freshwater regime from the glacier ice melts. This selectivity gives preference to the salps as the dominant species while decreasing krill abundance. During lower sea ice seasons the density of krill declines while the salp population increases.

Carbon sequestering into the deep ocean from the algae and phytoplankton occur by both the salp and krill. Both species eliminate the atmospheric carbon received from the primary producing algae by producing fecal pellets by the salps and sticky balls by the krill, thereby, reducing the amount of carbon dioxide in the atmosphere. The salps though sequester more carbon into the cold deep ocean than the krill. However, the krill provides the most efficient pathway for carbon transfer up into the food chain. The cryptophyte dominated waters are less efficient in the food chain due to increased feeding by salps and the difficulty of the krill to utilize the cryptophytes as a food source. Migration patterns by penguins are changing, in part due to the changing krill population. Krill is a mainstay diet for penguins, and if the krill population changes, many other ecological changes occur with it.

Steve Bynum has worked at Palmer Station along the Antarctic Peninsula. He not only enjoyed the ecosystem along the Bellinghausen Sea but he has also witnessed the changing climate conditions.

Join Steve at http://www.climatechangenewsletters.com as we take a journey to discover the warming and cooling effects of our planet.

TheGrahamBaileyShow Episode 3 in Going Green

The Perfect Solar Storm: A Global Disaster

The average solar cycle lasts for eleven years. The cycle includes a minimum of solar activity and a maximum. The sun is unusually quiet right now and has been for some time but there should be an increase in solar activity at some point in the near future.

The best current scientific estimate for the next solar maximum is 2012. If this estimate is correct, there is still a few years to try and prevent the potential of a future global disaster. A disaster that would begin on the surface of the sun and could end with tragedy on earth.

The surface of the sun is a mass of plasma that contains highly charged energy particles. Once in a while, some of these particles escape the suns surface and a mass of plasma travels through space on the solar wind. This process is known in scientific terms as a coronal mass ejection but it can also be called a solar storm.

A disaster for the planet would occur if a solar storm reaches and hits the earths magnetic shield in just the right way. If it were to happen, millions of people would lose their lives and the planet would be thrown into chaos as the technology that has become crucial to every day living suddenly gets taken away.

The perfect solar storm will start with skies that will be filled with a bright red aurora. However, soon everything will become dark as every electric bulb becomes devoid of light. The storms damage to the electric grid would be caused through an increased DC current. The runaway current would knock out and melt hundreds of key transformers within minutes, cutting off power for hundreds of millions of people.

Those damaged transformers cannot be repaired only replaced and installing a replacement takes a well-trained crew a week or more. Its incredible to consider that most major electrical utilities have just one or two suitably trained crews available for these type of transformer repairs. In addition, there are only a few spare transformers available and the rest would have to be built to order. Its a process that can take nearly twelve months.

So, the power blackout from the perfect solar storm would last for months but its not just the absence of light that would be the problem. Drinking water would still come through the taps for maybe half a day after the storm. With no electricity to pump water from reservoirs, there would be no more tap water after that.

The electric grid is necessary for almost all natural gas and fuel pipelines to operate. As a result, fuel and natural gas will quickly run out and without food delivery, supermarket shelves would soon become bare. Soon it would become necessary to control public hysteria and the military would have to be called in to restore civil order

There will be no power for heat, cooling or refrigeration until the grid is repaired and after their back up generators run out, hospitals will not be able to provide modern healthcare. A lack of water and food will result in spreading disease but Pharmaceutical companies without electricity will not be able to produce the necessary medicine.

Of course, many will say that this is absurd science fiction and it cannot happen here, but this chilling disaster scenario was outlined in a report released last January (funded by NASA) by the US National Academy of Sciences (NAS).

The fact is that a storm from the sun did hit the earths magnetic field in 1859. The effect of this solar storm on earth became known as the Carrington Event. The event was named after the amateur astronomer who observed two patches of intensely bright and white light emanating from a large group of sunspots that may have produced the event.

The solar storm that produced the Carrington Event created a red aurora across the planet from the poles to the tropics. Throughout the world, telegraph systems crashed, machines burst into flames, and electric shocks rendered operators unconscious. Compasses and other sensitive instruments reeled as if struck by a massive magnetic fist. It can happen again and the technology of the planet is now much more advanced and vulnerable.

The next solar maximum is estimated to return in about three years. A global disaster from the perfect solar storm can be prevented with proper contingency planning. There is still time for the government to be proactive and prepare to avoid disaster by creating a potential response to quickly repair the damage to the electric grid from the perfect solar storm.

James William Smith has worked in Senior management positions for some of the largest Financial Services firms in the United States for the last twenty five years. He has also provided business consulting support for insurance organizations and start up businesses. He has always been interested in writing and listening to different viewpoints on interesting topics. Visit his website at http://www.eworldvu.com or his daily blog at http://www.eworldvublog.blogspot.com

Green Tech News

2008 - Going Green Tech News

Gasification Sees a New Dawn and How it Will Benefit Us All

If you search for gasification and terms like “wood stove” on video sharing sites these days you will see demonstrations of wood being burnt in little stoves which seem to something almost miraculous and quite different from our idea of wood as a fuel. These little boilers light rapidly, produce no detectable smoke after the initial lighting and firing, and burn very hot.

So what is the technique which is being used, and how might it help us all in weaning society off fossil fuels?

What you have seen is a method of gasification. It differs from combustion in that it uses just 20% to 30% of the air or oxygen necessary for complete fuel combustion. During gasification, the amount of air supplied to the gasifier is carefully controlled with the effect that only a small part of the fuel burns completely. Trials of this process have illustrated that up to 70% of the energy value of the fue used can be recovered as what is known as synthesis gas, or syngas. This producer gas can also be used for various applications similar to natural gas.

This is a part of the magic, and not one really shown in the YouTube type videos, but it makes this method even more useful. This is due to the fact that syngas can be put to useful work, in both drying the feed fuel prior to gasification and after collection and storage it can be used as a fossil fuel replacement, and renewable energy source. When a gasification plant also includes Combined Heat and Power (CHP) and/or electricity export from the site, the gains are even more impressive.

Gasification in addition promises to be the most efficient long-term solution for capturing carbon while utilizing these valuable feedstocks, and storing the CO2 for very long priods, to reduce or halt global warming.

Gasification of wood and wood-type residues and waste in fixed bed or fluidised bed gasifiers with subsequent burning of the gas for heat production is has become state of the art with designers of thes systems working hard to gain the absolute maximum efficiency out of these systems.

These wood gasifiers which are located primarily in the Scandinavian countries are used almost entirely for space heating heat generation. Gasification of biomass is the renewable fuel system preferred by many, and can be defined as the thermal conversion of solid biomass to gaseous fuel.

Gasification has been around for over a hundred years, but the benefits of biochar are only now being discovered. Furthermore, it is still a wide-open field.

Before electric lighting was available in cities there were street lamps fuelled by gasified coal. It is easy to forget that the process has been reliably used on a commercial scale worldwide for more than 50 years in the refining, fertilizer, and chemical industries, and for more than 35 years in the electric power industry. More than 75 companies involved in the development, licensing, and use of these technologies as well as engineering, construction, equipment manufacturing and production of synthesis gas by gasification from coal, petroleum coke, heavy oils and other hydrocarbons.

Gasification has been proven to be a viable technology for CO2 capture and reducing SOx, NOx, particulate matter, and mercury emissions from coal and petcoke-fired power plants, synthetic fuels production, and chemical facilities.

Plants in this category have been capturing carbon dioxide for several decades in chemical plants in China and the United States. It also has potential contributions to make to both transportation and electrical power energy markets. With ongoing concerns about the price and availability of oil, populous countries like the U.S. gasification has proven to be in high demand and quite successful. However, it can also be used in conjunction with gas engines and gas turbines to obtain a higher conversion efficiency than conventional fossil-fuel electric power generation. Gasification can help meet renewable energy targets, address concerns about global warming, and contribute to meeting global environmental targets.

Steve has built a great web site where there is a lot more information about gasification. This is a hot subject indeed for this technology which has become an essential read for all those in alternative energy and interested in taking action to reduce the impact of climate change.

What is the Real CO2 Footprint of a Product?

We’ve certainly seen quite a few companies come out and say that their manufacturing facilities have a zero impact on the environment, meaning zero footprint, but indeed, there is much controversy on how to determine what a zero foot print is. It’s almost impossible to get to zero, even if a company goes and plants 10,000 trees over the course of 5-years.

The other day at a Think Tank meeting, we were talking about how to establish a complete CO2 discharge chain of a product, including all its components in the process of making it. From the wrappers, card board box, printing, assembly, energy to do all that, the distance the people traveled to work in what type of cars, etc. I mean really narrowing down the actual discharges.

Not because we are Global Warming alarmists, but because we feel it is not exactly correct for a company to claim Zero Emissions. And that we must have a more realistic view of the total process, Supply chain and all.

Many companies like Dell in Texas have stated that they have finally achieved zero emissions, but they were attacked for stating that, why? Because, everyone has a different concept of what nothing is. In other words we are all out there fighting over nothing and that makes no sense to anyone, no matter how you figure it.

Indeed, we should be applauding Dell for their solar panels, LEEDs certified warehouses and assembly plant and all their hard work and meaningful dedication to do the right thing. And yet, we are not doing that are we? Instead we find people attacking businesses, even those that go out of their way, spending millions of dollars to do the right thing. I ask are we doing the right thing by allowing persnickety environmental complainers to attack America’s greatest companies?

Lance Winslow – Lance Winslow’s Bio. If you have innovative thoughts and unique perspectives, come think with Lance; http://www.WorldThinkTank.net/.

Farmers market with Chef Carlin

How to NOT Be One of Them – Farmers Are Being Pushed to Increase in Size Or Get Out!

It doesn’t matter what size it is, your farm is an ever increasing asset, even more so if you can provide chemical free, clean food.

Australian conventional food prices are forecast to quadruple in price over the next five years. The reason is Asia. We are in the middle of a global revolution in the way we think, eat and live.

This week I received this news from Craig Sobey who has recently toured China with representatives from five city councils, Austrade and Regional Development Victoria and reports that there is a real opportunity for all to take a significant market share in this period.

Basically, if it is Australian and premium quality there is a ready market. Australia is seen as a source of safe food regardless of whether it is organic or conventional. At this stage price does not appear in the conversation, just consistent supply and traceability. The interest in all products represented included convenience food packages (pre-cooked), meats, dairy, wines etc.

Did you know:

• This co-op now owns China’s fifth biggest supermarket chain with over 500,000 stores.
• There is a farmer’s co-op representative with over five million members?
•  6,000 of them over 30,000 sq metres. The supermarket turned over 18 billion dollars in 2007 with revenues growing by 150 % per annum on average.
•  They have offered an entire Australian Pavilion for Aussie produce including organics in their premiere stores in Beijing and Shanghai. Organic Wines were the big attraction.,
•  China creates 80,000 millionaires each year.
•  There are over 350 million middle class and a niche market of super wealthy Chinese? (Craig told me that French wine is selling as much as $600 a bottle and even one watermelon cost $40!).

However there is real interest in China for organics (which they refer to as Green Food) and particularly food safety/ traceability which is the paramount concern for all serious buyers they met. A new Australian wide network (not for profit) company is being formed for all sections of the organic market. This is so that a pool of members can tackle the export markets together. Its goal is to give you an export premium to help make membership very appealing.

The time is ripe for all growers to stop and think about the future of their farming. What choice will you make? Your future will depend on it. Even if all of Australia’s certified organic farmers, processors etc. were to unite they could not supply the market in China alone and therefore there is untapped potential over the next ten to twenty years to be further developed.

Farming Secrets is a club for farmers who want to farm healthier and more profitably. Farming Secrets reconnects them with the experts through supporting them with one to one help and constant support from experts in order to fast track their farming goals that much quicker.

Hugo Disler

For More information about Natural and Organic Farming visit http://www.farmingsecretsblog.com

To discover the secrets of natural and profitable farming, visit http://www.farmingsecrets.com

Marvell's digital PFC chips

Water Extraction in DC

There are many beautiful and interesting sights in Washington DC, among them are the White House which has been home to every president of the United States ever since 1800; the Tidal Basin Lake famous for its abundant Japanese cherry trees that blooms in Spring; the Lincoln Memorial and Jefferson Memorial, Washington Monument, etc.

But regardless of the beautiful tourist attractions that one could go to in the State of DC, natural calamities in the form of flooding sometimes happen. And when it does, most household residents in DC do the physical cleanup by themselves without hiring water extraction professionals or experts to deal with the situation. Prior to actual removal of water and cleaning, the starting place of the water which caused the flood should be identified as soon as possible and fixed permanently to prevent it from arising all over again.

Cleaning would usually require having to remove all visible waters first by making use of a wet vacuum pump or a bucket – depending on the volume and availability of equipment. The extraction process must be done immediately or as soon as possible to avoid a higher cost of damage inflicted by the dirty waters and also to thwart of any possibility that the area becomes a source of infectious diseases due to the presence of pathogens.

When all the water has already been extracted, floor coverings should be removed immediately and disposed properly. This includes removing items which came in contact with the flood water that are very porous, because the high absorbency rate of such materials has already contaminated the item in question making it very dirty and highly infectious. No amount of cleaning or fixing could reinstate it in its previously clean state; hence replacements should be made eventually if still needed.

Brushing all affected surfaces with a soapy water solution removes the presence of dirt. Pay particular attention to dirt which is inserted within cracks on walls and floors. Rinse the entire area by using a mop and bucket or a garden hose with a spray gadget.

When the rinsing stage has already been done, disinfecting the entire place is a must to remove remaining germ and fungal spores. Remember that disinfecting does not entirely mean total sanitation but a means of making the area or place habitable again. Never mix chlorine bleach with other cleaning products that contain ammonia as this will produce poisonous gas. Before and during application of any disinfectant, make sure to open all air passage ways and vents to avoid inhaling the vapors of the disinfecting agent upon application.

After having done the disinfection phase, the whole area must be thoroughly dried out, and drying usually takes a couple of days or weeks depending on how big the place is and the weather. The re-occupation of any living space which has been previously flooded must only be done once the area is declared by a professional water extraction expert to be absolutely dry. The dryness is tested by a moisture meter which shows the amount of moisture above and below a given area.

Leo Nov is an editorial staff member of RestorationSOS. To learn more about Water Extraction visit our website. Click here for more information on Water Extraction DC.

Solar Dismisses Guru Family Claims

Rapper MC SOLAR has slammed reports he is preventing his collaborator and pal GURU’s family from visiting his hospital bedside as he recovers from a heart attack.

Solar Basics: The Easy Guide [Giveaway]

We are giving away one (1) copy of this book to a random commenter, so make sure to comment before the end of Friday, March 12, 2010.* Solar power is…

Solar Power for Buses – Renewable Energy Hub | GreenEnergyMarket.org

A bus powered with solar energy. That gets my blood moving! SunPods Inc., a California-based manufacturer of modular, fully integrated and tested solar power generation systems, and Bauer Intelligent Transportation, a leading provider …

DJ Premier Blog: Solar Puts Guru's Nephew on Black List at Hospital

Solar is a NOBODY in the Hip-Hop game. Can we PLEASE stop calling him ‘Superproducer?’. I don’t care if that’s what he calls himself because he is obviously a dilusional prick. Dr. Dre, Timbaland, The Neptunes, Pete Rock and DJ Premier …

Solar Energy is one pillar of future energy…Ivanhoe in Mojave is …

Our planet is certainly in need of more generation in the coming decade estimated at an additional 70-100GW .As conventional generation in fossil and others lose steam, Solar,Wind will fill the gap..